Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ sfic best housing ”

RELATED FAQS

Question
Answer
Driver pins on SFIC mortise housings loosen up and fall out.
Issue:  Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...
What cylinder and cam is used with the 650 series keyswitch?
1 1/8" mortise cylinders fit the 650 series keyswitch.  The 650 series keyswitch when ordered with the cylinder, will come complete with the correct cylinder, cam, and any required blocki...
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions.  Blocking Ring  Specify Dimension  1//8" ...
What is the M504-413 tool used for?
Used for installing interchangeable core housings.
See attachment that describes this tool.
Will the SFIC mortise housing accept both six and seven pin cores?
Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.
Will Schlage make a cylinder in another vendors keyway?
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...
Will Schlage locks with a BD suffix accept a best SFIC core?
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into the lock and will operate t...
How to order the mortise full size interchangeable core with a construction core.
This only applies to the full size interchangeable cores.  The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed).  Simply add (-ICX) to the end o...