Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ sfic capping tools ”

RELATED FAQS

Question
Answer
What is the M504-413 tool used for?
Used for installing interchangeable core housings.
See attachment that describes this tool.
Is Primus available in 6 or 7 pins?
Primus is only available in 6 pins in a conventional key-in-lever or full size interchangeable core designs.
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.
Will the SFIC mortise housing accept both six and seven pin cores?
Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.
Will a Falcon cylinder work in a Schlage lock?
Key in lever Falcon cylinders do not work in Schlage locks.  The cylinders may fit, but there are no specific tailpieces created to operate any Schlage lock. SFIC SFIC is universal so Falcon and...
   Hotel cylinder in L9000 As long as the correct cam is used (Schlage clover), a Falcon Hotel cylinder will properly function in an L9486 hotel lock.
How can you tell the difference between the FSIC and SFIC cores?
There are several ways to spot differences, see Figure 1, but the easiest is to look at the face of each core. The face of both cores looks like a "figure 8".  With small format, bo...
Schlage AL small format spacer installation requirements.
The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores.  When these spacers are not ins...
What cylinder and cam is used with the 650 series keyswitch?
1 1/8" mortise cylinders fit the 650 series keyswitch.  The 650 series keyswitch when ordered with the cylinder, will come complete with the correct cylinder, cam, and any required blocki...
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions.  Blocking Ring  Specify Dimension  1//8" ...
What is the control key bitting for 0 bitted small format interchangeable cores?
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.