Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ sfic core driver ”

RELATED FAQS

Question
Answer
Driver pins on SFIC mortise housings loosen up and fall out.
Issue:  Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...
What is the part number for the SFIC rim cylinder driver?
The Schlage SFIC rim cylinder driver is part number B520-365, shown below.     Figure 1: SFIC Rim Cylinder Housing
What are the part numbers for the SFIC driver and spacer used on the ND series locks?
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer
What is the part number for the SFIC driver on the AL locks?
The small format core throw member for the AL locks is C604-381.
What is the part number for the full size core driver for the ND series?
The ND-Series FSIC driver is part number N523-127.
What parts are needed to convert JD to BD on an ND lock?
For ND locks shipping on or after January 30, 2017, the lever and core driver will need to be changed to convert from JD to BD.SFIC lever, 03-200SFIC driver and spacer, 09-774
For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed.  Depending on the function the components below are required.Outside spring c...
Can an ND lock with SFIC cores be extended to fit a 3" extended outside door?
ND locks can be extended up to 6" Extended Outside.  
How do you order the ND series lock with a small format core?
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.
How long is the ND tailpiece for a thick door?
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock will need to ...