Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ SFIC cylinder code ”

RELATED FAQS

Question
Answer
What is the part number for the SFIC tail piece for a W lock?
Q330-168 SFIC Tailpiece (throw member for levers) Q330-169 SFIC Tailpiece (throw member for knobs) 
What is the part number for the SFIC driver on the AL locks?
The small format core throw member for the AL locks is C604-381.
What are the part numbers for the SFIC driver and spacer used on the ND series locks?
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer
What is the part number for the AL SFIC spacers?
The AL lock will be shipped with two spacers.  Use two spacers for 6-pin cores and use one spacer for 7-pin cores.
The part number for one spacer is D500-000.
What is the part number for the SFIC rim cylinder driver?
The Schlage SFIC rim cylinder driver is part number B520-365, shown below.     Figure 1: SFIC Rim Cylinder Housing
Will Schlage locks with a BD suffix accept a BEST SFIC core?
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into th...
Is a standard cylinder keyway such as "C" available in SFIC?
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key fami...
What cylinder and cam is used with the 650 series keyswitch?
1 1/8" mortise cylinders fit the 650 series keyswitch.    The 650 series keyswitch when ordered with the cylinder, will come complete with the correct cylinder, cam, and any ...
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions.    Blocking Ring  Specify Di...
Will Schlage make a cylinder in another vendors keyway?
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.
Driver pins on SFIC mortise housings loosen up and fall out.
Issue:  Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...
Will the SFIC mortise housing accept both six and seven pin cores?
Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.
How do you identify what size a 2030 closer is?
The Date Code and Closer Size are stamped in the backside of the closer body. Closer Size: If the number is "1", the closer is a 2031 or 5031. If the number is "3", the closer is a 2...
What are the part numbers for the ND lock spring cages?
ND -series locks manufactured on or after January 30, 2017 use the following spring cages:Outside - N523-218 - For ALL cylinder options except for JD-YA6, JD-YA7 and JD-MEDInside - N523-222 -...
ND-series locks manufactured before January 30, 2017 used the following spring cages:
Will Falcon B locks prepped for BD accept a 6 or 7 pin core?
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core).  The tailpiece shown below is used for bo...