Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ sfic mortise cam ”

RELATED FAQS

Question
Answer
What cam to use for a modular cylinder in Sargent mortise lock?
The Sargent cams listed below work for all applications except 16 inside and 50 outside.  The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...
Can the modular cams be used on the older cylinders?
The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.
What is the part number for a Schlage cam to operate a Corbin lock?
Schlage offers several Corbin Russwin competitor cams.  The left most column  in the image below describes what Corbin function the cam is used on and the additional columns show Modular,...
What mortise cylinder cam is needed for KR4023?
The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions.
Will the SFIC mortise housing accept both six and seven pin cores?
Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.
What cylinder and cam is used with the 650 series keyswitch?
1 1/8" mortise cylinders fit the 650 series keyswitch.    The 650 series keyswitch when ordered with the cylinder, will come complete with the correct cylinder, cam, and any ...
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions.    Blocking Ring  Specify Di...
Driver pins on SFIC mortise housings loosen up and fall out.
Issue:  Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...