Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ soss hinge and closer ”

RELATED FAQS

Question
Answer
What closer can be used with Soss invisible hinges?
Using Soss hinges with closers can require special device and preparation locations. If you have questions on specific closer applications, please e-mail your request (including a description ...
Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.
What are ANSI BHMA hardware grades?
The American National Standards Institute (ANSI) and Builders Hardware Manufacturers Association (BHMA) have developed durability, strength and performance standards for every type of door hardware...
Can a 4010 be mounted with swing clear hinges?
Locate closer and arm from the centerline of the swing clear hinge pin.
Can a Cam Lift hinge be used with LCN closers?
Cam Lift hinges can only be used with LCN door closers that have a "Regular" style arm.             Manual Closers: Maximum li...
What hinges can an EPT be installed with?
EPT can be used on following hinges: Degree of the opening Hinge type Door thickness 0-180 degree Up to 5" butt hinges 1 3/4" 0-180 degree Up to 3/4" offset pivots 1 3/4" 0-130 degree 5 1/2"...
See related solution: Can an EPT be used with Cam Lift Hinges?
When sizing for a Glynn-Johnson overhead, how is a Soss hinge considered?
Consider the Soss hinge like a butt hinge to determine the size of overhead that is needed.  For templating use the same mounting group as a 4" wide butt hinge and the appropriate door thickness.
What degrees of opening can a 4110 EDA be templated for?
The 4110 EDA/HEDA can be templated for 100°, 140°, and 180° hold open. The hold open adjustment can be set to hold the door at any position (degree) up to the maximum door opening angle. For "Wi...