Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ SOSS hinges with concealed stop? ”

RELATED FAQS

Question
Answer
What closer can be used with Soss invisible hinges?
Using Soss hinges with closers can require special device and preparation locations. If you have questions on specific closer applications, please e-mail your request (including a description ...
What hinges can an EPT be installed with?
EPT can be used on following hinges: Degree of the opening Hinge type Door thickness 0-180 degree Up to 5" butt hinges 1 3/4" 0-180 degree Up to 3/4" offset pivots 1 3/4" 0-130 degree 5 1/2"...
See related solution: Can an EPT be used with Cam Lift Hinges?
Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.
When sizing for a Glynn-Johnson overhead, how is a Soss hinge considered?
Consider the Soss hinge like a butt hinge to determine the size of overhead that is needed.  For templating use the same mounting group as a 4" wide butt hinge and the appropriate door thickness.
What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?
The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm  with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm op...
What is the part number for the rubber tip for an Ives hinge pin door stop?
Model 69 the part number is 09-310Model 70 & 73, the part number is WSPART.1075
Will a Senior Swing work with swing clear hinges?
Push Side Surface Mount Senior Swing can be used with swing clear hinges, standard templating. Pull Side Surface Mount Senior Swing cannot be used, the pull arm will hit the back of door at approxi...