The ND lock can be installed on a 1 3/8" thick door by utilizing spacers, part number XN12-012. These spacers are included with the lock when ordered for a 1 3/8" thick door. The spacer...
As of February 2016, ND locks began shipping with a new latchbolt. The new latchbolt offers substantially improved performance in adverse door conditions (ex, with heavy door loading) andis more ro...
Prior to February 2016, using ND-Series locks on hollow metal doors required the use of latch spacers which prevent the latch from "fishtailing" (back end of latch moving from side to side). Latch ...
Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...
In the early cylindrical version of the AD-Series 993 locks, a spacer may be required for proper cylinder functionality.
Effected cylinder types are PD / LD / RD / JDIf a customer is ...
The SL-Series door is a square edge non-handed door.
A Hinge Filler (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...
See image, ANSI A115.1 Mortise Lock Prep
This door prep requires the N escutcheon with the L283-029 spacer kit to keep the springcage from falling into the door.&nbs...
The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores. When these spacers are not ins...