Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Standard falcon key blank ”

RELATED FAQS

Question
Answer
What are the key height and spacing for Falcon standard and restricted keys and cylinders?
Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system
Can the Schlage L or LP section key blank be cut in the field?
Schlage does not recommend cutting the L or LP section key blanks in the field.  Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key...
What is the part number for an Everest key blank?
Part numbers listed below:
Is a standard cylinder keyway such as "C" available in SFIC?
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key fami...
What keyway comes with the Falcon 19-KIL?
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.
What is the Falcon restricted keyway process for new end users?
A PO from a distributor with a letter of authorization from the end user.
Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
What punches are available to cut keys?
 See tables below for available punches.   KEY SECTION  BLUE PUNCH   Everest S*, C*, & Classic/Obverse*  40-075   Everest T* & ...