Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ STANDARD HARDWARE FINISHES ”

RELATED FAQS

Question
Answer
What is the standard memory level for a biometric F-series HP-3000-E-XL?
The biometric F-series HandPunch 3000-XL, the HandPunch 3000-E-XL, and the HandPunch 4000 are all "Break Compliant" hand reader models.  Each of these hand readers utilizes an Extended Us...
FINISH HARDWARE
Architectural Hardware
What are the LCN standard finishes?
The current Powder Coat finishes are: Aluminum (BHMA 689) Dark Bronze (BHMA 695) Brass (BHMA 696) Light Bronze (BHMA 691) Statuary Bronze (BHMA 690) Blac...
Tan Powder Coat can be ordered but only available as a special finish with a metal cover.
White Powder Coat can be ordered as a special RAL finish with a metal cover.
STANDARD FINISH
626 Satin Chrome
EXIT HARDWARE
RPD, VRPD, Rim Exit, Mortise Exit, Vertical Rod Exit, Surface Vertival Rod, Concealed Vertical Rod
What is the part number for a blade stop shim for a 6111 or 6113 electric strike?
010055-xx is the part number for Blade Stop Shim kit for 6111 or 6113 electric strike and it must be ordered separately.  xx is for the finish callout.
When using the Von Duprin 6211 with the Schlage L9000 lock, is the standard 3/8" ANSI offset used?
No, due to the location of the deadlatching cam on the face of the Schlage L9000 lock, the Von Duprin 6211 is placed much "lower" on the frame than the standard 3/8" ANSI prep (typically "higher"...