DW and K-Series frames are designed to slip onto a stud wall after the wall is finished (painted, wall papered, etc).
Walls can be either wood stud or steel stud
Used only for interior applicat...
The rough opening dimensions are the same for either Welded (SUA) or Knock Down (KD) frames
For F, FN, FE, DE, MU three sided frames and four sided borrowed light frames:
New masonry W...
For DW, K three sided frames and four sided borrowed light frames:
Three sided frame = door opening width (order size) plus 1 1/2" minimum to 2" maximum and the door opening hei...
Drywall Slip-on frames are recommended and designed to be installed as KD (Knock Down) assemblies and not recommended to be welded (SUA). If a DW-Series or K-Series is welded prior to installa...
Yes, an additional jamb anchor can be used at the bottom of the frame in lieu of the typical (adjustable or weld-in) base anchor in fire rated frames.
This is limited to the anchor designed for...
Steelcraft does not offer doors with textured steel face sheets. Textured steel options (EP1 and EP3) were discontinued in 2000 due to lack of demand
Steelcraft does offer optional GrainTech steel...
Steel transom panels are available:
1 3/4" thick panels - supplied in L-Series (L20, L18 or L16-Series) laminated construction. Recommended down sizing is as follows:
Without Transom Bar
3...