Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ tailpeice for sargent lock ”

RELATED FAQS

Question
Answer
What Schlage cam will operate Sargent locks?
Click here for a list of available Schlage cams comparable to the Sargent 13-0660.
What are the part numbers for the ND lock spring cages?
ND -series locks manufactured on or after January 30, 2017 use the following spring cages:Outside - N523-218 - For ALL cylinder options except for JD-YA6, JD-YA7 and JD-MEDInside - N523-222 -...
ND-series locks manufactured before January 30, 2017 used the following spring cages:
What is the part number for the twisted tailpiece for AD/CO exit device trim locks?
The part number for the AD or CO twisted tailpiece kit is: 46929303 Tailpiece Kit - (for Exterior Escutcheon -993 into Exit Device, i.e. Von Duprin 98 or 99) Exit Trim 46929303 Includes the...
Can the AL locks be ordered to accept Corbin Russwin core?
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.
Is the ND lock available to accept Sargent, Corbin Russwin, Yale or Medeco cores or cylinders?
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
What cam to use for a modular cylinder in Sargent mortise lock?
The Sargent cams listed below work for all applications except 16 inside and 50 outside.  The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...