Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ tailpiece for schlage mortise cylinder ”

RELATED FAQS

Question
Answer
What is the part number for the Schlage small format rim cylinder tailpiece?
B502-899 is the tailpiece for both the SFIC and standard rim cylinders.
What is the part number for the Schlage cylinder to work in a Falcon T lock?
Schlage offers Falcon Retrofit cylinders to fit many of Falcon's locks.  Table 1 below contains part number for T series locks.  Table 1 - Falcon retrofit cylinders  
What non IC cam is offered by Schlage to work in a Falcon MA lock?
Schlage now offers modular style cams to operate the Falcon MA locks.  The following part numbers are cams for all MA locks (except the MA381): L583-638 for 1-1/8", 1-3/8", 1-5/8" length cylin...
Price Book 72A List Price $8.10
What is the thread on a mortise cylinder?
The thread spec on Schlage and Falcon mortise cylinders is 1.150 x 32
Why does my AD or CO series lock unlock when the lever is raised?
Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted.    This will occur if the outside spindle (square post) is install...
What is the tailpiece and driver part number for the 20-057?
The B220-001 is an FSIC rim tailpiece and driver.
What is the length of a Schlage rim cylinder?
The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece.  Because of allowable tolerances for each part the average length is l...