tailpiece for yale large format

RELATED FAQS

Question
Answer
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders.  Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
B502-899 is the tailpiece for both the SFIC and standard rim cylinders.
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core).  The tailpiece shown below is used for bo...
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately.   If an extended tailpiece is needed, then a complete lock ...
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key fami...
No, the Von Duprin 22 device and 230L trim is only provided for door thickness up to 2 1/4".  
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam.     Schlage Cams for Yale 2160  Part Number  Description  B520-7...
The 23-030 is a Schlage Full size interchangeable core. 
The "C" indicates small format IC core, which is the only core style Falcon products.  The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.
Standard Schlage cylinders will not fit in Yale locks, but Schlage does offer special retrofit cylinder that, when ordered, can fit into specific Yale locks.  See below for retrofit options.  ...