Tailpieces that can work with SFIC

RELATED FAQS

Question
Answer
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into the lock and will operate t...
The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece.  Because of allowable tolerances for each part the average length is l...
B502-899 is the tailpiece for both the SFIC and standard rim cylinders.
Schlage does not offer the B250 with Primus and it cannot be ordered less cylinder.  It is possible to install a Primus cylinder as a Primus cylinder will fit into a B250 housing as long as it wa...
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.
1 1/8" mortise cylinders fit the 650 series keyswitch.  The 650 series keyswitch when ordered with the cylinder, will come complete with the correct cylinder, cam, and any required blocki...
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions.  Blocking Ring  Specify Dimension  1//8" ...