Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ templete lonitude lever with l escutcen ”

RELATED FAQS

Question
Answer
What other locks can the blue lever removal tool 24002693 be used with?
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
Can you get an E9875L or E9975L with a rigid lever (L-NL or L-DT)?
The E7500 electric mortise lock body supplied on E98/9975 devices require active trims (L, L-BE, TP, TP-BE, K, or K-BE) to retract the latch after the electronic lock body unlocks.
Is the Schlage Latitude and Longitude lever available in a stainless steel finish?
Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes.
What is the square block that holds the L lock levers onto the door?
The square block is probably the springcage assembly, L283-040.  This component has an internal spring to keep the lever in the horizontal position.
What is the part number for the inside lever on an L9000 lock?
The part number is the 09-402, specify the design and finish.
Where are hardware templates?
All the templates can be found at us.allegion.comPlease click here
How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...