thick door lock screws

RELATED FAQS

Question
Answer
B500 with standard cylinders How to order with the deadbolt: Door thickness over 1 3/4" to 2 1/4", specify door thickness when deadbolt is ordered Door thickness greater than 2 1/4" will req...
A 4040 closer mounted with thru bolts on a 2-3/4" thick door would require 1/4-20 X 3-1/2" machine screws.
Schlage and Falcon double cylinder deadbolts have concealed screws to prevent tampering. The two methods used to conceal the thru-bolts are using screw caps or a faceplate. Use the below instructio...
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...
First, take wire in shape of 9 and pop off interior door knob or lever. Second, take a flat nose screwdriver and pop off the decorative trim. Lastly, you will see the screws and be able to remove l...
The minimum door thickness that the AD or CO series lock will mount on is 1 3/8".  Be advised that this will require additional spacers to be ordered separately to allow the lock to mount...
Specify how the door is extended and the door thickness. Example 3" EE    Pricebook availability:    Extended Equally (EE)- Over 2"- 6" Extended Insid...