Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ TORNADO LOCK APPLICATIONS ”

RELATED FAQS

Question
Answer
Where can I find hurricane ratings for Schlage and Falcon?
  There are several Schlage and/or Falcon locks that have been tested and approved for this application. For Commercial use the locks have been tested and approved as ...
Why does the Schlage Utility Software application display the error message "E201 - This device is not connected?"
The E201 message can be ignored and all normal SUS and lock functions will be maintained.  Click "OK " and continue. Update the Schlage Utility Software (SUS) to version 4.6.0 or highe...
What door meets FBC / NOA Zone 4 requirements?
H-Series doors in single leaf applications with only mortise locks meet the FBC / NOA Zone 4 requirements? 3070 max flush outswing applications Zone 4 requires 120 to 170 psf.
Can H-Series doors be used in tornado applications?
No. The Steelcraft H-Series hurricane door does not meet the FEMA 361 guidelines. The Paladin (PW14-Series) door does meet the FEMA 361 guidelines.
What door is used in a tornado application?
Tornado shelter applications require the use of Paladin PW14-Series doors and FP14-Series frames: Tornado shelter doors are a tested system comprising of the door, frame and hardware. ...
What is the Multi Point LM9300 Series?
MultiPoint locks are three-point locking systems that secure the door at three points – top, bottom, and traditional center latch location. Operating just like traditional locks, MultiPoint locks...
Is the LM9000 certified for in-swing and out-swing applications?
On May 1, 2013 the LM9000 lock was discontinued and replaced with the LM9300 Multipoint Lock. 
The LM9000 is only certified outswing when used for tornado applications.
What is the difference between the L-Series and H-Series doors?
The L-Series doors are designed for virtually all construction requirements in commercial building applications. They have also been tested and approved for uniform wind load per ASTM E330. ...
Are flush bolts available on the inactive leaf of hurricane double doors with either FBC or NOA approvals?
Ives SB360 surface bolt at top and bottom are the only flush bolts approved for use on H-Series hurricane FBC or NOA applications? The only approved latching hardware for inactive leaf of pairs w...