Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ trim function codes ”

RELATED FAQS

Question
Answer
Does the Von Duprin E996L trim require the NL drive screw be installed into the device to function properly?
Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E99...
How do you route the wires for an E996L trim through the exit device?
The wires run through the device out to the EPT. See step 7 on page 5 of E996L instructions.
What trim will work with the discontinued Monarch18 series exit devices?
Falcon Monarch XX series trims will work with Monarch 18 series exit devices.
What electrified trim will work with 98 or 99 series devices?
The only electric trim that is used with the 98/99 series exit device that Von Duprin offers is E996L lever trim.
E996L electric trim is used to lock or unlock the lever trim for the 98/99 series exit devices.
On a HandPunch when the "Time and Attendance" mode is activated, how do you perform a "Department Code" Function?
On a biometric F-Series hand reader, if the "Time & Attendance" mode is activated:press your ID then #, choose from 1-IN  2-OUT  3-BACK  (press either 1 or 2 or 3); the reader wi...
Does Von Duprin supply the 9875, 9975, 9875-F and 9975-F mortise exit devices with NL-OP trim function?
No, the 98/99 series mortise exit device should be ordered as NL less trim. IE, 9875NL-L/TRIM. NL-OP suffix is normally used with the 98/99 series rim, surface and concealed vertical rod devices wh...
How to order a 25-C device with the NL-OP trim function?
Device would be ordered as a 25C-C as of June 2012. C nomenclature is for the Cylinder. 
How does the outside trim function on a Chexit Rim or Vertical Rod device?
A thumbpiece, knob or lever trim left in the unlock position would be locked when the Chexit is armed and unlock when the Chexit device is disarmed. To keep the outside trim in the lock p...