Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ trim lock slide ”

RELATED FAQS

Question
Answer
How many wires does the Von Duprin E7500 lock body have and how are they used.
The Von Duprin E7500 has a total of 8 wires. Two power wires. 12VDC solenoid has yellow wires. 24VDC solenoid has black wires. Six switch wires. Latchbolt monitor switch has three wires,...
Does the Von Duprin E996L trim require the NL drive screw be installed into the device to function properly?
Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E99...
How can the Von Duprin 98/9975-L with 996L classroom trim function be converted as a night latch function in field?
The following steps are required to convert the Von Duprin 98/9975L from classroom to night latch function: Order new 996L-NL-M trim and reset NL drive screw in mortise lockbody as se...
Will an AL lever fit onto an A-series lock?
The AL and A trim is not compatible with each other.
What is the difference between the Falcon M and MA series mortise locks?
Here are some of the major differences between the M and MA-Series.  Lever mounting post holes -  Locations have changed on door template.  (12 and 6 o'clock for M lock, MA lock is approx 1 and...