Hinge backset is the dimension from the leading edge of the hinge to either the stop on the frame or to the stop face (push side) of the door.
For operating clearance, the hinge backset on the d...
Hinge Spacing: All 4 1/2" and 5" butt hinge spacing
1. Opening heights 3'0" through 4'11 15/16" (one pair butt hinges)
from under head CL 9 3/4" (top of door 9 5/8")
from bottom of frame ...
Hinge Backset:
On the frame = 5/16"
On the door = 1/4"
Lock Spacing: All standard bored locks ANSI 115.2 (161, 61L type), for mortise lock ANSI 115.1 (86 type) all locations must be altered 3/8" lower, and standard strike (ASA type).
1. Opening ...
Steelcraft follows the industry standards for hinge reinforcement and preparation for both door and frame. Unless otherwise specified all products prepared for butt hinges will have mounting holes ...
The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4".
The latch supplied is the 13-047 deadlatch and 13-048 springlatch.