Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin exit device lever return ”

RELATED FAQS

Question
Answer
Can danmark lever designs be used on Von Duprin Exit Device trims?
Von Duprin does not offer any of the danmark lever designs by Schlage.
Why doesn't full rotation of the AD or CO Series Exit Trim (993) outside lever fully retract the Von Duprin 98/99 Exit Device latch?
- AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device.  Be sure this screw is installed- Exit hardware and strike must be properly mounted ...
How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: Remove ...
What are Frascio levers?
Frascio is a company that provides decorative lever sets for many of Allegion products.  More information can be found on their web site at WWW.frasciointernational.com.
What is the part number for the lever return spring for the old M series mortise lock?
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series.  Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...
What is the door-to-lever tip distance on the S Jupiter lever?
The lever return distance (tip of lever to door face) on the Jupiter lever design is approximately 1-3/4".
Why does the lever on my T lock lever droop?
Issue: One or both levers don't stay horizontal and droop down.Facts: Falcon T series locks in a high use application.Cause: Weak or broken springs within the springcage.Solution: Replacement sprin...
What are the dimensions on the LAT and LON levers?
See dimensions for LAT and LON levers from the L9000 series
What is the California State Reference Code regarding lever return?
This is in regards to the California State Reference Code, (Formerly Title 19, California State Fire Marshal Standard) stating that all levers with returns comply; levers must return to within 1/2"...