Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin pneumatic parts manual ”

RELATED FAQS

Question
Answer
What part is required to add a sequencing feature to a 7902/7982 control box?
The sequence card part number is 3426 and plugs in the "S" slot of a control boxes right next to the 10 pin terminal strip. The 7902/7902ES or 7982/7982ES can be converted to a 7902S/7902SES or 79...
Does Von Duprin have an exit device that is pneumatic?
The Von Duprin Pneumatic PN98/99 series exit devices feature provides remote latch bolt retraction in hazardous areas where electrically operated devices would not be permitted.
The Von Duprin Pneumatic or "PN" device was designed for Intrinsically Safe Class 1, Division 1 applications.The device does not have a specific listing or certification pertaining to hazardous loc...
Which of the Pneumatic operators uses the same cylinder?
4810 series is a Top Jamb Pull Side application. 4820 series is a Top Jamb Push Side application. 4840 series is a Parallel Arm Push Side application.
The 4840 and the 4810 are they only cylinders that can be interchanged, they use the same cylinder for their individual applications.
Can you use the 925 tubing from LCN for the PN Von Duprin devices?
If using the LCN pneumatic control box as the air source for the Von Duprin Pneumatic devises then you have to use the LCN 925 tubing because of the size of air line fitting on the LCN co...
Can the Von Duprin EL option be added to any existing 98/99 device?
The Von Duprin EL option can be added to any existing 33A/35A, 98/99 series exit devices. 
What is the part number for the 6000 series electric strike 24VDC solenoid?
The Von Duprin 6000 series electric strike can be converted by ordering the appropriate kits below.  Kits include the solenoid, plunger, spring, and washer. 6000 Series solenoid Kit 12VDC -...
How do I change the handing on the Von Duprin 373L trim?
Changing the handing on a Von Duprin 373L trim requires following parts on all lever designs EXCEPT #12: RHR requires part number 090092-00 (LEVER CONTROL SPRING RHR PKG/4) and 050597-...
Are there any instructions for Von Duprin device maintenance?
Please see the Maintenance Kit Manual for information on device lubrication as well as complete breakdowns and parts lists for Von Duprin exit devices.Exit devices and latc...
Is there an exploded view for the B663?
A B663 exploded view can been found here.
Where are the part manuals for Falcon exits?
Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the 
What is the part number for the Von Duprin maintenance kit?
Von Duprin has a maintenance kit part number 050046-00 and maintenance instruction, part number 941079-00 for 98/99 series devices. There are some common parts between 98/99 series and 22...
How does the Von Duprin 88TP convert to an 88L?
Followings are the steps to convert the Von Duprin 88TP to 88L device. Need to replace the back plate on the 88 exit device, part number 050103. Order a 373L trim and specify handing. Recomme...
How to convert the Von Duprin 6000 series electrical strike from Fail Secure to Fail Safe or Fail Safe to Fail Secure?
To convert the Von Duprin 6000 series electric strikes from FS to FSE  or from FSE to FS follow these steps: Remove the electric strike face plate. Remove the strike box cover pl...
Part numbers: FS slider, part # 970387 (6211WF/6212WF/6221/6223 only) FS slider, part # 970388 (Except 6211WF/6212WF/6221/6223) FSE slider, part # 970388 (6211WF/6212WF/6221/6223 only) FSE sl...
What are Pneumatic Automatic Operators?
 Pneumatic Automatic Operators are used in areas where electrically operated devices are not convenient or permitted.  Consists of a modified, heavy-duty door closer for manual oper...
Why is the Von Duprin 55 or 88 series crossbar sagging?
Number of reasons could Von Duprin 55 or 88 series cross bar to sag. Attached are the reasons that could cause the cross bar to sag or not lift. The hinge case spring lifts both lever arms and t...
What is the minimum and maximum PSI applied to a 4800 operator?
The pneumatic operators are designed to function with an input air pressure to the 7901/7902 Series control box of 80 (min) 100 (max) PSI, and an output pressure of 60 to 80 PSI to the pneumatic (2...
Can a pneumatic (PN) 33A/35A/98/99 exit device use the RX or LX switches?
PN33/35/98/99 Pneumatic exit devices are not usually used with RX or LX switches since the Pneumatic PN device is used instead EL to eliminate the electric from the device.
Pneumatic tubing run lengths.
The maximum 925 tubing run length from the Control Box to the Door Closer is:  7980 Series Control Boxes --- 50 "Linear" feet from Control Box to Door Closer.  7900/7940 Series Control Boxes --...
Is the Von Duprin Chexit part number 050228 a module or a kit?
The circuit board is sometimes referred to as a "module" in the field.
What Von Duprin solenoid crosses over to the solenoid part number 971687?
If you are trying to replace Von Duprin EL solenoid part number 971687, the sellable part number for the solenoid and plunger is 050535.  Please note that the solenoid is rarely the cause of E...
Can a Von Duprin 3' pushpad exit device be converted to a 4' device in the field?
A 3' exit device can not be modified to a 4' exit device. You will need to replace the device with a 4' one.
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
How do I replace an E996L solenoid?
Order E-Trim Mech Kit  part #050671-00 which will include a new solenoid already mounted to the blocking mechanism. See installation instruction # 921297 here which will show how to remove block...
What is the part number for the Schlage thumbturn rim cylinder?
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...
What is the part number for the end cap and bracket for the 22 device?
End cap without end cap bracket is 968601. End cap kit with bracket is 900981 End cap bracket is 971795-89
How do you convert the Von Duprin 370 series controls to NL or night latch function?
You must have the Von Duprin NL Cylinder plate part number 967484-89 to convert the 370 series controls from classroom function to night latch function. If new installation, use the NL cylinde...
Can a Von Duprin 996L trim be converted to E996L trim?
A E996 conversion kit is required to convert the 996L/L-BE trim to E996L/L-BE electric trim. 050672-00 is the electric conversion kit for 996L rim or vertical rod exit device. 050673-00 is the ...
What parts do I need to add to the bottom rod of my existing Von Duprin 8827 LBR exit device?
To add the bottom rod and latches on 8827LBR it requires Bottom Rod Kit part #050455-XX 8827 Rod Guide Kit part #50482-XX 8827 LR Bottom Latch Kit W/Cover part #050467-XX 304L Bottom Strike
What is the part number for the Von Duprin 98/9947 ratchet release assembly?
Part # 106222
What is the part number for the Von Duprin 15 second CX sign?
113781 is the part number for Von Duprin 15 second CX sign.
What is the Von Duprin Chexit module part number?
Part number for Von Duprin standard 15 sec. release Chexit module shipped after 8-24-2015 with motor driven is 040086-00. Part number for Von Duprin standard 15 sec. release Chexit module shi...
What is the part number for the Von Duprin E996L solenoid?
This solenoid is replaceable and the part number is 050671.
What is the part number for the Von Duprin ALK Board?
The part number for Von Duprin exit alarm ALK board is 101030-00.
Can the Von Duprin Chexit device be changed to ALK exit alarm?
The Chexit device has a different base plate and center case than the ALK.  The Chexit device would need to be replaced with an ALK device.
What is the part number for the 88 series dogging screw?
The part number for 88 series dogging screw is 090004 (package of two) and 090083(package of ten).
What is the part number for the HD EL conversion kit for Von Duprin devices?
HD-EL conversion kit for 3 feet exit device is 050384-00 and for 4 feet is 050385-00.
What is the size of the current Von Duprin dogging key?
All Von Duprin exit devices (22, 33/35A ,55 ,88 ,95 and 98/99) use 5/32" dogging key. There are two part numbers available: 090005 is the package of 2 and 090085 is the package of 10.