Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin tables for cutting devices ”

RELATED FAQS

Question
Answer
How far down can an exit device be cut down in the field?
For most exit devices, please refer to the specific device series catalog for minimum door opening width the device can be cut down to fit.Be aware that some device options, frame conditions, and s...
Can you use a Von Duprin 94/95 Inpact device on a wood door?
The Von Duprin 94/95 series Inpact devices can only be installed on metal doors as there would not be enough material left in the wood door after cutting out the 94/95 device prep to maintain door ...
What are the part numbers for the new Falcon T latches?
 Falcon T Lock Latch Conversion Table       Effective mid-June 2013  Old Part Number   New Part Number       ...
   Falcon T Lock Latches No Longer Offered With The T Lock     Effective mid June 2013  Old Part Number  New Part Number   &nb...
What is the minimum opening that a Chexit 4' device can be cut down?
The Von Duprin CX 98/99-4 feet Rim devices on single doors with 5/8" stops and the standard 299 roller strike can be field sized to fit a minimum of 40.2" door opening.  This an...
Can the existing 9927/9947/9948 devices be cut to fit a 24" leaf?
No, the existing 98/9927/F, 98/9947/F and 98/9947/F devices can't be cut to fit a 24" leaf door.
Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?
You need to order the EL98/9947 or 3'  EL conversion kit.  This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.
What is the correct Schlage cam # for 718C for a concealed vertical rod device?
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers) Devices built Befo...
 Modular 1-1/8"  Modular 1-1/4"  SFIC and FSIC  Non-Modular Non-IC Conventional  Non-Modular Non-IC Everest Primus  B520-730  B520-731  B520-2...
What back plate conversion kit is required for the 88 with the 373L trim?
Attached tables provide the back plate conversion kit for all 88 series Exit devices. 88 Back plate conversion Chart