W series thick door

RELATED FAQS

Question
Answer
Standard mounting packages are only for a 1 3/4" thick door. Door thickness other than 1 3/4" need to be specified when ordering the device.
The B600 (standard cylinder only) can be be specified for 1 3/8" thin doors and the appropriate parts will be supplied.  Interchangeable cores are not available for 1 3/8" thin doors.
The outside housing, B600-089, can be ordered to retrofit an existing standard cylinder B600.Description: 1 1/8” Collar (trim ring) for 1 3/8” – 1 5/8” door
Levels and Models (covered in ANSI A250.8 (SDI 100) "Recommended Specifications for Standard Steel Doors and Frames") are SDI term aid in the selection and specification pr...
Window kits are available for Steelcraft doors as either factory installed or prepared and installed by a distributor. Factory prepared light cutouts are supplied with Dezigner trim as st...
The standard out-of-the-box ND lock will fit the following door ranges: All functions except ND85 will fit onto a door 1 5/8" through 2 1/8" extended equally. The ND85 will fit on doors fro...
The Falcon MA will not fit a 1-3/8" thick door. 
For W lock levers, you can choose whether or not to install the mounting posts.  This will also affect how the door is prepped so be sure to determine how you will install the locks befor...
Yes, glass light can be used or prepped in conjunction with the Von Duprin 94/95 Series INPACT device however there are dimensional limitations between the glass light and the InPact door preparati...
Glass lights available: Standard Glass Lights - The N4, N5 & V lite can be used at standard locations with out any modification. Glass Light Options - Other glass lights are available but ...
The AL series lock fits up to 1 7/8” door thickness out of box.
The minimum door thickness that the AD or CO series lock will mount on is 1 3/8".  Be advised that this will require additional spacers to be ordered separately to allow the lock to mount...
Specify how the door is extended and the door thickness.  Pricebook availability: D knobs ordered for Extended Equally (EE) and Extended Differently (ED) doors over 2" up to 2 1/2"...
The standard door range for a B600 is 1-3/4" to 2".  This includes Standard cylinder, Full Size IC and Small Format IC. Non standard door thicknesses include the following and are availa...