L583-446; Schlage Adams Rite MS modular cam used on 1 1/8", 1 3/8" and 1 5/8" cylinders
L583-447; Schlage Adams Rite MS modular cam used on 1 1/4", 1 1/2" and 1 3/4" cylinders
B502-944; Sch...
Conventional Cylinders - A conventional cylinder is one that requires some breakdown of the lock in order to be removed.
These are the most commonly used cylinders sometimes called key-in-lever...
Refer to table 1 for the list of Schlage AL-Series cylinders.
AL-Series Cylinder Reference Table
Function
Cylinder Mechanism
Complete Cylinder
Non-Hotel Functions
...
Finish is not specifically stated as being covered under warranty as it is covered under defects in material and workmanship. EXCEPTION: There is no finish warranty for Falcon products. ...
Please contact the Allegion Product Support Team on all questions or inquiries pertaining to hardware finishes warranties. Please send an e-mail to the applicable Product Support team:Closers_TechP...
Warranty Statement
3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below
The provisions of these limited warr...
The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...
Standard Schlage cylinders will not fit in Yale locks, but Schlage does offer special retrofit cylinder that, when ordered, can fit into specific Yale locks. See below for retrofit options.
...
The 2670 Guard X uses a standard rim cylinder for either push side or pull side.
The rim cylinder can be installed to the outside of the opening with an offset pull to operate the 2670 Guard X d...