Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What are Through Bolts ”

RELATED FAQS

Question
Answer
Does Ives offer a 296G Flush Bolt?
The 296G is is not a model number but rather the UL listing number. This listing would be on many Ives Flush Bolts including; FB30 and FB40 series Automatic Flush Bolts FB50 and FB60 ...
What where the S200 design improvements made in 2008?
On April 7th 2008 enhancements to the S200 were completed: The deadbolt was replaced with the B500 style New tailpiece required to accept the B500 deadbolt New interconnect ass...
What is the mounting hole pattern on the 1260 closer?
The 1260 Series closers have a bolt hole (mounting pattern) of 9-1/16" horizontal x 3/4" vertical
How can I get help for my Locknetics Products?
Locknetics company supplied electro-magnetic locking devices, electronic smart locks, and electronic security components to access control dealers and lock smiths.  Ingersoll-Rand acquired ...
What are the dimensions of the SC70 footprint
The measurements from center line to centerline of the mounting holes are 2-3/8"  x  6-3/4".
Are flush bolts available on the inactive leaf of hurricane double doors with either FBC or NOA approvals?
Ives SB360 surface bolt at top and bottom are the only flush bolts approved for use on H-Series hurricane FBC or NOA applications? The only approved latching hardware for inactive leaf of pairs w...
What are the differences in B500, D100, and D200 bolts?
The bolts used in these products are similar except for bolt material. B500 and D200 - Zinc bolt D100 - Steel bolt
Explain the B580 deadbolt function.
The B580 "Door Bolt" is a deadbolt that is thrown or retracted by the inside turn unit only. There is no outside trim or keyed cylinder.
Does Von Duprin offer any pulls that through bolt to the Guard-X device?
Von Duprin does not offer any lever trim or pulls that through bolt to the Guard X device.  Ives has the 8102-6 and 8105-6 pulls that can be lined up with the mounting screws of the exit device b...