Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what cylinder for exit devices? ”

RELATED FAQS

Question
Answer
Is the Double Cylinder option available on Von Duprin vertical rod models of the 98/99 series exit device?
Double cylinders are only available on Von Duprin 98/99 Rim and 98/9975 Mortise devices.
What is the part number for the Schlage thumbturn rim cylinder?
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...
Can the CD cylinder dogging and RX switch be ordered with 33/35 or 98/99 exit device?
Cylinder dogging (CD) and an RX switch can be ordered together with 33/35 or 98/99 series.
This can be done ONLY with non fire rated exit devices.
What cylinder is needed with Von Duprin exit alarm ALK?
The ALK uses a 1 1/4" mortise cylinder with straight cam. (NO DOGGING)
Can I use CD and ALK on a 98/99 series Von Duprin?
Standard 98/99 exit alarm ALK devices are available with cylinder dogging option as of October, 2011. The device can be ordered standard with cylinder dogging and exit alarm ALK opti...
What cylinder is used in a 210K trim for the 22 series exit device?
Equivalent to the Schlage D series line with a C keyway. Part number 21-002.
Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?
 A 1 1/4" cylinder with straight cam is required for the Von Duprin SD (Special Dogging) exit device option.
The cylinder cam must be inverted with the SD option to work properly.