Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what cylinder is used for CDSI ”

RELATED FAQS

Question
Answer
Does Von Duprin offer a classroom security option with visual status indication?
Von Duprin offers two options:   The CDSI/HDSI Dogging Indicator provides an at-a-glance verification of the status of the door from inside of the room. Visible “LOCKED” and “UNLO...
What cylinder is used in a 210K trim for the 22 series exit device?
Equivalent to the Schlage D series line with a C keyway. Part number 21-002.
Which conventional cylinder cam is used with an Adams Rite MS series lock?
L583-446; Schlage Adams Rite MS modular cam used on 1 1/8", 1 3/8" and 1 5/8" cylinders    L583-447; Schlage Adams Rite MS modular cam used on 1 1/4", 1 1/2" and 1 3/4" cylinders  B502-944; Sch...
What is the part number for T lock tailpiece used with a conventional cylinder?
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders.  Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
What is the Falcon cam designation for use on 25 series trims?
For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam 
What are the key height and spacing for Falcon standard and restricted keys and cylinders?
Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system
Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?
 A 1 1/4" cylinder with straight cam is required for the Von Duprin SD (Special Dogging) exit device option.
The cylinder cam must be inverted with the SD option to work properly.
What Schlage cam will operate Sargent locks?
Click here for a list of available Schlage cams comparable to the Sargent 13-0660.