Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ WHAT DOES CUSH MEAN ”

RELATED FAQS

Question
Answer
CUSH
Cush -n- Stop Arm, Cush n Stop Arm, Cush and Stop Arm
Can you mount a 4041 Cush arm with a EDA arm template and get 180 degrees opening?
The dead stop post would need to be removed and the 4040/4040XP EDA mounting template for 180° would be followed.
Can you convert a 4041 Cush arm to a 4041 HCush arm and use the same templating?
The 4040XP/4041 Cush and HCush (Hold Open Cush) use the same instructions / template.
Can a 4040 open to 180°?
The 4040/4040XP closer mountings have the following maximum opening degree templating: The 4040/4040XP PA "Regular Arm" mount will allow for 180° max. opening. The 4040/4040...
What are the 1460 closer arm options?
The 1460 Regular Arm part numbers are: Regular Arm -- 1460-3077 or 1460-3077L for long arm (must specify finish). Regular Arm with PA -- 1460-3077PA (must specify finish). Regular Hold Open Ar...
Are there special brackets needed when using the 4110 series with a coordinator?
When using the 4111 with a bar style coordinator MB-mounting brackets ordered from IVES are required. The brackets wrap around the coordinator to provide a surface for mounting the parallel arm ...
Can a Cam Lift hinge be used with LCN closers?
Cam Lift hinges can only be used with LCN door closers that have a "Regular" style arm.     Manual Closers: Maximum lift dimension is 3/4". Can not be use EDA, CUSH, or Track Arm do...
What is the part # for the 4040 HCush arm?
The part number for the 4041/4040XP HCush arm is 4040XP-3049CNS.
Can I mount an LCN Cush closer with an GJ overhead stop?
It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.
Is the EDA or Cush arm with threaded studs still available?
ST-3195 is used to obtain the old style EDA or Cush arms which were assembled with threaded studs so that you could take apart the arm assemblies. Our current standard EDA and Cush arms are rivet...