Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what does lat lever look like ”

RELATED FAQS

Question
Answer
What are the dimensions on the LAT and LON levers?
See dimensions for LAT and LON levers from the L9000 series
Is the Schlage Latitude and Longitude lever available in a stainless steel finish?
Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes.
What other locks can the blue lever removal tool 24002693 be used with?
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
What are the new suited M levers from Schlage and Von Duprin?
Schlage and Von Duprin introduced the new M Collection of decorative levers in January 2014. Click here to visit the new webpage.  
Can you get Avalon lever for 25 series lever trim?
See 24 and 25 series trim section in the Price Book.
What is the California State Reference Code regarding lever return?
This is in regards to the California State Reference Code, (Formerly Title 19, California State Fire Marshal Standard) stating that all levers with returns comply; levers must return to within 1/2"...
What levers are available knurled from Von Duprin?
Only the 02, 03, 06, and 17 levers on 360L, 370L, and 996L series trims are available in knurled. Von Duprin doesn't offer Teflon coating.
What was the part number for the old D series levers spring cage?
The old D series springcage part numbers are as follows: C303-035 - Inside Springcage C303-036 - Outside Springcage These parts are no longer available.