Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What does SS look like? ”

RELATED FAQS

Question
Answer
Is there a template that shows where to drill the hole for E/EL/SS/RX/LX/CX wires?
The hole should be drilled in the field once the end cap is located on the door.  It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...
What grade of stainless steel do we use in the levers on L9000 locks?
Schlage offers 629 and 630 stainless finishes on levers for the L-Series only.  These levers are made of 303 or 304 grade stainless steel.
Can you have an EL device and a SS device on the same device?
You can not have an EL and SS in the same device as the EL and SS devices have two different base plate assembly.
Can the Von Duprin SS and ALK option be in the same device?
Depends on what is being ordered; SS can stand for either the "Signal Switch" or the "Silk Screen" push bar. The SS (Signal Switch) and ALK (Exit Alarm) sit in the same location in the exit devi...
What is the difference between Von Duprin LX and/or RX switches and the Signal Switch SS option?
The RX monitors the push bar while the LX monitors the latch bolt of the exit device. A SS device has an LX and a key cylinder switch plus an emergency push bar signage.