Security anchors are used in DW/K frames located directly above or below strike preparation on door side of frame. Because there are only two points of anchoring, the compression anchor near the he...
Both the DW and K-Series frames are identical with the exception of the base anchoring. Both the DW and K-series frames are supplied with a field adjustable compression anchor in each jamb located ...
No, an adjustable base anchor is not supplied on frames with existing opening anchors.
The anchor design for use in existing masonry walls, is a pierce and dimple in the frame soffit for 3/8"...
Drywall Slip-on frames are recommended and designed to be installed as KD (Knock Down) assemblies and not recommended to be welded (SUA). If a DW-Series or K-Series is welded prior to installa...
CAD drawings are available for doors and frames in 3 drawing formats:
Autocad (.dwg) - Release 12
Encapsulated PostScript (.eps)
Data Exchange (.dxf)
Drawings are available on the...
Masonry T anchor are approved for fire rated frames up to 3 hours. T Anchors are shipped lose for field installation.
Anchor construction: The T portion and the strap do have minimum dimensions th...
Yes, an additional jamb anchor can be used at the bottom of the frame in lieu of the typical (adjustable or weld-in) base anchor in fire rated frames.
This is limited to the anchor designed for...