What exit device is suitable for exterior

RELATED FAQS

Question
Answer
Use the 575-2 strike with 9975 device on a pair of 1 3/4" thick doors with overlapping astragal mounting on the exterior of the active door. The strike lip has been cut off to eliminate any interfe...
For night latch function with pull by others, the 98/99 series mortise exit device should be ordered as NL less trim, e.g., 9875NL-L/TRIM.  We will furnish a device only, and the mortise cyl...
The ALK exit alarm will sound when the exterior trim is used to enter from pull side without using access control when an LX latch bolt monitor switch is used instead of RX push bar monitor switch.
Exit devices are not designed for exterior application. If used in an exterior applications then a powder coated finish on the 33/35 and 98/99 series are recommended for exterior applications. ...
When a CX99L-BE is not armed the exterior 996L BE lever trim will be free to retract the CX latch for entrance.  When the CX99-L BE is armed the exterior 996L BE lever will not move and...
The standard Von Duprin mechanical or electrical 98/99/33/35 exit devices can NOT be converted to a CX98/99 or CX33/35 device. Von Duprin CX98/99 or CX33/35 have a...
2021 Update: An updated version of this knowledge entry can be found by clicking HERE.       Part numbers for Schlage and Falcon cylinders for Von Duprin device...
  FALCON   Mortise Rim KIL Conventio...
    If unclear whether mortise, rim, or key-in-lever is needed, reference links below to determine what cylinder type is needed.   In order to determine cylinder type n...