Apartment
Corridor Lock function is defined as a lock where the latch bolt operated by
lever from either side, except when outside lever is made inoperative by a stop
or mechanical means other than...
W571 Corridor Lock
Deadlocking latch bolt. Push Button Locking. Button on the inside locks outside lever until unlocked by key or by rotating inside lever. Closing the door releases button....
Beginning with Firmware Packages ADFwPkg 2.16.3 and COFwPkg 1.20.0 the PIN length can be manually changed for AD200 and CO200 locks as follows:
1. Press {programming code (default is 97531)} then ...
CO-100 now allows the PIN code length to be changed manually. Each CO100 has a label that indicates its firmware revision. Firmware revision 2.5.0 or higher support these...
CO-100 PIN length can range from 3 digits to 6 digits with firmware version 2.5.0 and higher.
Procedure to change PIN length:
1. Press {programming code (default is 97531)} then {*}.2. Press {99} then {*}, to enter Special Function Length Menu.3. Press {4} then {*}, to enter Pin Length M...
CO-100 now has NEW lock status reporting capabilities.
Battery status, firmware version, hardware version and PCB serial number. See instructions below for these status menus.