Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What is difference between eda arm and cush arm ”

RELATED FAQS

Question
Answer
What is the difference between an LCN CUSH arm, and an LCN EDA arm?
EDA ARM - The EDA arm is a heavy duty parallel arm mount.  The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...
Can you mount a 4041 Cush arm with a EDA arm template and get 180 degrees opening?
The dead stop post would need to be removed and the 4040/4040XP EDA mounting template for 180° would be followed.
What is the difference between a 4110-18, and a 4110-18 CUSH drop plates?
The 4110-18, and 4110-18 CUSH  drop plates are identical. The difference between a 4110 EDA, and a 4110 CUSH is the templating on the door. That is why you order them differently, to...
Can a Cam Lift hinge be used with LCN closers?
Cam Lift hinges can only be used with LCN door closers that have a "Regular" style arm.             Manual Closers: Maximum li...
Is the EDA or Cush arm with threaded studs still available?
ST-3195 is used to obtain the old style EDA or Cush arms which were assembled with threaded studs so that you could take apart the arm assemblies. Our current standard EDA and Cush arms are rivet...
Can you convert a 4041 Cush arm to a 4041 HCush arm and use the same templating?
The 4040XP/4041 Cush and HCush (Hold Open Cush) use the same instructions / template.
Can you mount a 4011 as a parallel arm like the 4111?
The 4011 can only mount on the Pull Side of the door and the 4111 can only mount on the Push Side of the door. Differences - The 4011 and the 4111 cylinders are different and the pinion shafts are...
What are the 1460 closer arm options?
The 1460 Regular Arm part numbers are: Regular Arm -- 1460-3077 or 1460-3077L for long arm (must specify finish). Regular Arm with PA -- 1460-3077PA (must specify finish). Regular Hold Open Ar...
What is the standard arm for the 4110 series?
The EDA (Extra Duty Arm) is the standard arm for the 4110.
What is the difference between the 4040, 4010, 4020, and 4110 series closers?
4040XP Series (4040 DEL) is a universal closer. *(see note) Non Handed closer. Can be mounted on a RH or LH door. 4041XP - Adjustable size 1 to 6. Can mount push side or pull side of the doo...