Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What is H Cush arm function ? ”

RELATED FAQS

Question
Answer
How do you adjust a door closer?
How to:  What are the steps to adjust a door closer?Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment.  All closers with a "Delay" feature ...
What is the part number for the Spring Cush block?
The part number for the Spring Cush block assembly is: model number-3080. EXAMPLE: 4110-3080
How do I set the hold open on my 4040 closer?
The hold open position on a "REG" or "EDA"  hold open arm is set with the door to a few degrees shy of the desired hold open point. To properly set, open the door 5° less then the desired hold open...
Can I mount an LCN Cush closer with an GJ overhead stop?
It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.
Can a Cam Lift hinge be used with LCN closers?
Cam Lift hinges can only be used with LCN door closers that have a "Regular" style arm.             Manual Closers: Maximum li...
Is the EDA or Cush arm with threaded studs still available?
ST-3195 is used to obtain the old style EDA or Cush arms which were assembled with threaded studs so that you could take apart the arm assemblies. Our current standard EDA and Cush arms are rivet...
What is the difference between an LCN CUSH arm, and an LCN EDA arm?
EDA ARM - The EDA arm is a heavy duty parallel arm mount.  The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...