Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is included in senior swing parts bag? ”

RELATED FAQS

Question
Answer
Can you power an electric strike or maglock from the 9500 Series Senior Swing?
An electric strike or maglock (24 volt only) can be wired to a Senior Swing 2800/9500 series operator using the P10 Lock Interface cable. To power the 24VDC electric strike or maglo...
What wires are the activation inputs for the Senior Swing?
The current (digital control box) activation input wiring harness (# 761464-00) is included in the Sr. Swing parts bag (-518), and has 4 wires in it, Black, White, Yellow, & Gray. This harness p...
Is there an On/Off switch for the 9500 Senior Swing?
The Senior Swing has an optional (plug in) Off/Auto/Hold Open switch available. The 8310-806R (rocker switch), or 8310-806K (key switch). CANNOT use switch by others, requires a special (center - n...
Where does the 8310-877 safety sensor attach to the Senior Swing controller?
The 8310-877 Bodyguard Safety Sensor attaches (plugs in) to the P1 connector on the Senior Swing controller. The 8310-846 (761462-00) wiring harness "included" with the 8310-877 safety sensor is us...
What is the part number for the Senior Swing companion cable?
The companion cable can be ordered as a 9550-982 or a 2850-982, the same cable is used on both models.
What is the part number for the Senior Swing control box?
The Senior Swing control box is ordered as a 95xx-3462. Example - 9530-3462, 9540-3462.
The Senior Swing Series changed to the "Digital" control box in Sept. of 2006.
What is the Senior Swing 9540 REG arm part number?
Senior Swing 9540 Regular, push side arm, part number is: 9540-3077, specify hand and finish. Senior Swing 9550 Regular, push side arm, part number is: 9550-3077, specify hand and finish...
The part number for the threaded rod "only" on the Senior Swing regular arm is 9540-82, 9550-82, or 9560-82 or -82L for the long rod option. The part number for the threaded rod, turn buckles, an...
What parts are needed to change a Senior Swing 9530 to a 9540 operator?
To convert a 9530 to an 9540 you need to purchase the 9540-3077 REG push arm assembly. To convert a 9540 to an 9530 you need to purchase the 9530-3077 PLCM pull arm/track assembly.