Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is part number for sfic control key cb ”

RELATED FAQS

Question
Answer
Will Schlage make a cylinder in another vendors keyway?
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...
What is the part number for a full size interchangeable core control key?
Choose the appropriate full size control key from the selection below.
Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...
What is the part number for a full size construction control key?
The Schlage full size construction control key part number is 48-056-ICX.  The ICX suffix will change depending on if the key is for a new job or existing job.   New jobs: Specify "ICX"  E...
What is the control key bitting for 0 bitted small format interchangeable cores?
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.
What is the control bitting for Falcon 0 bitted cores?
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
What is the part number for the SFIC tail piece for a W lock?
Q330-168 SFIC Tailpiece (throw member for levers) Q330-169 SFIC Tailpiece (throw member for knobs) 
Will Falcon B locks prepped for BD accept a 6 or 7 pin core?
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core).  The tailpiece shown below is used for bo...
What are the part numbers for the ND lock spring cages?
ND -series locks manufactured on or after January 30, 2017 use the following spring cages:Outside - N523-218 - For ALL cylinder options except for JD-YA6, JD-YA7 and JD-MEDInside - N523-222 -...
ND-series locks manufactured before January 30, 2017 used the following spring cages: