Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is rim housing? ”

RELATED FAQS

Question
Answer
Does Schlage offer a Rim cylinder FSIC housing less core?
Rim cylinder housing only for FSIC is part number 20-079.
Rim cylinder housing only for SFIC is part number 80-129.
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.
What is the part number for the SFIC rim cylinder driver?
The Schlage SFIC rim cylinder driver is part number B520-365, shown below.     Figure 1: SFIC Rim Cylinder Housing
Is there a service kit for modular cylinders?
A service kit is available, part number 40-223.  Product description available HERE. 
Clip on the B500 or D200 SFIC deadbolt comes off shortly after installation.
Verify the door thickness is 1 5/8" or greater per the pricebook.  Thin doors will force the clip off the housing.  If door thickness is correct then replace the product as needed.
What is the part number for the dogged cam used in modular cylinders?
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mouting holes that allow for the cams to be mounted inverted...