Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ What lock series have vertical levers? ”

RELATED FAQS

Question
Answer
What is the part number for the lever return spring for the MA lock?
See Falcon MA lever assembly below: The spring mechanism (E) returns the lever to horizontal.  The parts are not sold separate, so if the lever sags, the entire lever assembly shoul...
Lever assemblies part numbers are found in the Pricebook.  Note they are handed.
Are there parts available for the old D lever locks?
The D lever was discontinued in October 2003 and there are no parts available.
What was the part number for the old D series levers spring cage?
The old D series springcage part numbers are as follows: C303-035 - Inside Springcage C303-036 - Outside Springcage These parts are no longer available.
What is the part number for the lever return spring for the old M series mortise lock?
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series.  Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...
How does the 98-2 or 99-2 double cylinder function affect the outside lever trim?
Inside cylinder locks and unlocks the outside trim, such as thumb piece, knob or lever.  Outside cylinder functions as an NL when inside cylinder locks the outside trim.Double cylinder fe...
Why does the lever on my T lock lever droop?
  Issue: One or both levers don't stay horizontal and droop down.   Facts: Falcon T series locks in a high use application.   Cause: Weak or broken springs within t...
Why does my AD or CO series lock unlock when the lever is raised?
Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted.    This will occur if the outside spindle (square post) is install...
What is the CO-220?
The Schlage CO-220 is standalone classroom lock down solution with remote fob and visual indicator which allows immediate local lock down by simply pushing the button on the remote fob from anywher...
How do I remove the lever on an M lock?
To remove the M lock trim follow the steps below in reverse.       The M lock spanner wrench is 021415.  Although this wrench is no longer available from&n...
Will an AL lever fit onto an A-series lock?
The AL and A trim is not compatible with each other.
Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
How do I cut a door to accept a Falcon W series lock?
For W lock levers, you can choose whether or not to install the mounting posts.  This will also affect how the door is prepped so be sure to determine how you will install the locks befor...
Why does my Trilogy Lock not retract the latch when I replace a lever trim on a 98/99 series device?
If the NL screw on the 99 device has been removed the Trilogy lock will not retract the latch.
What replaced the old D series lever locks?
The old D series lever lock was replaced by the ND lock in September 2003.
What is a lock function?
Apartment Corridor Lock function is defined as a lock where the latch bolt operated by lever from either side, except when outside lever is made inoperative by a stop or mechanical means other than...