What restricted SFIC keyways are available from Falcon


The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core).  The tailpiece shown below is used for bo...
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.
Schlage changed to the Everest 29 default keyway on March 4th, 2013. At that time, Everest 29 S123 became the default keyway for all Schlage locks. Everest product is still available but must be sp...
The FA3 keyway is the ILCO equivalent to a Falcon Conventional G 6-pin keyway.
Schlage Everest B keyways are restricted SFIC keyways.
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key fami...
Used for installing interchangeable core housings.
See attachment that describes this tool.
The CS200, S200, and S-Series is not available with the small format interchangeable core option.
The B250 product line is not available in the SFIC platform.
A PO from a distributor with a letter of authorization from the end user.
The H-Series is not available with a small format interchangeable core option.
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...
Schlage is pleased to announce in January 2012 the addition of small format interchangeable core (SFIC) and full size interchangeable core (FSIC) to our CS210 interconnected lock series.   Clic...