Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam.
Schlage Cams for Yale 2160
Part Number
Description
B520-7...
For modular designs:
All functions except ND85 the tailpiece part number is N523-022.
The ND85 tailpiece part number is N523-123.
For non-modular designs:
All functions except ND85 the t...
This is usually caused because the wrong tailpiece is being used on non-IC cylinders or the incorrect driver for IC options. Use the below descriptions to identify which they need.NON-IC: There are...
A Primus key can operate a non Primus cylinder as long as the keyway is the same or the key is a multi-section. Additionally, the cylinder must be pinned to be operated by the top cuts of the Prim...
Refer to table 1 for the list of Schlage AL-Series cylinders.
AL-Series Cylinder Reference Table
Function
Cylinder Mechanism
Complete Cylinder
Non-Hotel Functions
...
Schlage does not offer the B250 with Primus and it cannot be ordered less cylinder.
It is possible to install a Primus cylinder as a Primus cylinder will fit into a B250 housing as long as it wa...
The ND85/AL85/A85 hotel lock is only available in a conventional Key-in-Lever cylinder. Interchangeable core and Primus are not available with this function.
A Primus Hotel cylinder (as well as an IC hotel cylinder) is not possible because there isn't enough room inside the cylinder for all of the required components.
The 6 digits stamped on the key can be referenced by the Key Control group to identify the system. Please call 877-671-7011 option 1, option 1 and request the Key Control.
DESCRIPTION
PART NUMBER
Conventional Core
23-030
Conventional Core less logo
23-031
Primus Core
20-740
Primus XP Core
20-740-XP
Primus Core less logo
20-741
...
HIGH SECURITY
Primus/Primus XP: In addition to six cuts for standard locking mechanism, there are five side finger pins to operate the secondary sidebar lock. Primus keys will operate non-Primus l...
Primus XP high security cylinders are available to add patented* key control and varying degrees of geographical exclusivity to most Schlage 6-pin key systems, whether using Everest or Classic keyw...
UL437 is testing requirement that cylinders pass both a timed cylinder pick test and a forceful core/cylinder pull test. We have various cylinders to meet this need, please reference our price boo...
When you want to periodically disable and block access to a certain room in a building or an entrance door, that’s when you would need to use a Lockout Cylinder. See full document.
Primus XP was released on 11/08/2007 with the following highlights:
The XP is patented until 2024.
Primus XP has the addition of a new #7 fingerpin with a unique angle combined with a new pocke...
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers)
Devices built Befo...
Modular 1-1/8"
Modular 1-1/4"
SFIC and FSIC
Non-Modular Non-IC Conventional
Non-Modular Non-IC Everest Primus
B520-730
B520-731
B520-2...
Schlage does not recommend cutting the L or LP section key blanks in the field. Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key...
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for ...
ND-Series Cylinder Reference Table
Function
Door Thickness
Cylinder Mechanism
Complete Cylinder
Non-Hotel Functions
Standard
Conventional
23-065
Primus
20-765
Pri...
Choose the appropriate full size control key from the selection below.
Classic Conventional Key Blanks and Cut Keys
Part Number
Description
Key Blanks
35-056
Control
Standard bow, embossed both sides
35-076
Standard bow, unembossed both s...
L583-446; Schlage Adams Rite MS modular cam used on 1 1/8", 1 3/8" and 1 5/8" cylinders
L583-447; Schlage Adams Rite MS modular cam used on 1 1/4", 1 1/2" and 1 3/4" cylinders
B502-944; Sch...
On ND-series locks manufactured on or after January 30, 2017, the following parts are needed to convert the lock from JD to LD:03-231 - Open Cylinder lever (specify design and finish)N523-022 - Tai...