which credentials support no tour


See attachment for details: Magnetic Swipe reader supports:
See attachment for details: Smart readers support:
All Keypad ONLY credentials with firmware versions between 2.9.2 and 2.11.0 should be updated to the latest firmware available at www.schlage,com/support.
A firmware issue with Keypad ONLY credential firmware, versions 2.9.2 through 2.11.0 and manufactured between 9-9-2010 and 1-5-2011 will exhibit poor battery life.
The Keypad ONLY credential Reader (KP) can prevent the reader from entering its low power sleep mode - with firmware versions 2.9.2 through 2.11.0
A Technical Note has been generated to document one method of measuring battery current. See the attachment HERE.
HandNet Lite is a no-cost application that can be found on the Access Control Support Disk.  The disk is included with every HandKey.  The application can also be obtained through an FTP ...
There are two new credentials available which allows a facility currently using iButtons credentials to transition to proximity credentials. Since the new AD and CO series units no longer supp...
The BE467/FE410 supports the following credential types:Smart credentialsMIFARE Classic 2.5Kbit, 8Kbit, 32KbitMIFARE DESFire EV1 16Kbit, 32Kbit, 64KbitMulti-tech125KHz prox/MIFARE Classic 8Kbit, 32...
The BE467/FE410 does not support prox-only credentials.
A reader powered by a USB cable (via a computer's USB port or a powered USB plug) used to enroll smart credentials used in Multifamily access. The reader uses a Wi-Fi connection for enrolling no-...
See attachment for details: Proximity readers support