Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ which schlage rim cylinder for von duprin rim device trim ”

RELATED FAQS

Question
Answer
Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?
 The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal.
What cylinder does the 512 TP NL use?
A 1-1/8 through 1-1/2" mortise cylinder with straight cam per Step 4 of 512NL Instructions.
What is the part number for the Schlage thumbturn rim cylinder?
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...
How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...
Does Von Duprin still supply cylinders keyed alike?
Von Duprin does not supply cylinders keyed alike.   Cylinders keyed alike are available from Schlage and Falcon.
What cylinders are used to operate Von Duprin devices?
2021 Update: An updated version of this knowledge entry can be found by clicking HERE.       Part numbers for Schlage and Falcon cylinders for Von Duprin device...
  FALCON   Mortise Rim KIL Conventio...
    If unclear whether mortise, rim, or key-in-lever is needed, reference links below to determine what cylinder type is needed.   In order to determine cylinder type n...