EPT can be used on following hinges: Degree of the opening Hinge type Door thickness 0-180 degree Up to 5" butt hinges 1 3/4" 0-180 degree Up to 3/4" offset pivots 1 3/4" 0-130 degree 5 1/2"...
See related solution: Can an EPT be used with Cam Lift Hinges?
The 4110 EDA/HEDA can be templated for 100°, 140°, and 180° hold open. The hold open adjustment can be set to hold the door at any position (degree) up to the maximum door opening angle.
For "Wi...
Butt hinges can be used on doors up to 4' wide and 200 pounds. There is no maximum door height, just need to add a hinge for every 30" or part there of over 7'.
An EPT can be used with a Cam Lift Hinge:
Maximum hinge lift dimension = 1/2".
The EPT must be installed correctly with the tube at the top on the door side and the tube at bottom on...
Von Duprin doesn't offer any electric strike to fit into 1 1/2" aluminum/metal faced frame. Minimum requirement to install 6211/6211AL is 1 15/32" mortise depth.