Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ will AL series work with Medeco cores ”

RELATED FAQS

Question
Answer
Can the AL locks be ordered to accept Corbin Russwin core?
The AL lock can not be ordered to accept any competitor full size core.  The ND lock should be used in these applications.
Schlage AL small format spacer installation requirements.
The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores.  When these spacers are not ins...
Will Schlage locks with a BD suffix accept a best SFIC core?
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into the lock and will operate t...
Is the ND lock available to accept Sargent, Corbin Russwin, Yale or Medeco cores or cylinders?
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
Why can't I remove the control key from the core after the core is inserted into the lever?
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
What does the hotel indicator look like for the A, AL, D, and ND?
Indicator not extended Indicator extended
The indicator on a cylindrical hotel lock is a small pin that projects outward from the face of the cylinder plug (Figure 1) when the inside push button is depressed.  When this pin is pr...
How to order a T series lock with a Corbin Russwin full size interchangeable prep.
Specify the J cylinder suffix followed by IC-CR6 or IC-CR7 (6 or 7 pin Corbin core) Example: T581J IC-CR6  This will accommodate an 8000 or 8000-7 Corbin Russwin Full Size core.