Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ will current concealed vertical rod devices work with older locknetics trim ”

RELATED FAQS

Question
Answer
Will a 510L or 511L trim work for a vertical, mortise, concealed, or rim device when ordering the trim by itself?
The "500" Series trim in general (510L, 511L, 512's, & 513K) will work with all 25 series devices and are not device specific.
Is the Von Duprin 1609 strike fire rated for pairs of doors?
The Von Duprin 1609 cannot be used on a pair of fire rated doors. We recommend using the Von Duprin fire rated mortise exit device in lieu of the rim device such as the Von Duprin 5575-F,...
How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?
To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: Remove ...
What is the difference between Von Duprin 98/9947 and 98/9948 concealed vertical rod devices?
There are two main differences:The bottom latches are differentThe Von Duprin 98/9947 concealed vertical rod device covers up to 1/4" undercutThe Von Duprin 98/9948 concealed vertical rod device co...
They both use Template # 10320_c
Do the old 3347 rods work with the new 3347A exit device?
The old 33/3547 rods will not work with new 33/3547A exit device.
Will the new 712L work with old 17 series?
The 24 series & older 17 Series trims are compatible with each other.
Do we have trims for old style 33/35 series of devices?
We no longer carry trims for the old style 33/35 exit devices.  New trims for 33A/35A series exit devices will not work with the old 33/35 series exit devices.
How does the outside trim function on a Chexit Rim or Vertical Rod device?
A thumbpiece, knob or lever trim left in the unlock position would be locked when the Chexit is armed and unlock when the Chexit device is disarmed. To keep the outside trim in the lock p...
What is the correct Schlage cam # for 718C for a concealed vertical rod device?
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers) Devices built Befo...
 Modular 1-1/8"  Modular 1-1/4"  SFIC and FSIC  Non-Modular Non-IC Conventional  Non-Modular Non-IC Everest Primus  B520-730  B520-731  B520-2...
Can I use an AD or CO - 993 Exit Trim with a Von Duprin 98/99 Concealed Vertical Rod exit device on a wood door?
The AD or CO - 993 is NOT compatible with a Von Duprin 98/99 Concealed Vertical Rod exit device on wood doors.
Where is the template for the 718 trims made after 2/28/2011 for Falcon/Monarch concealed vertical rod devices?
See the installation instructions 718 for -C devices.
Templates for current 718 series trim can also be found on Falcon website