will mik read prox

RELATED FAQS

Question
Answer
It's essentially the same as the usual MT reader except that it has an embedded HID iclass reader to read the secure part of an iclass card. So yes it will.
For F-series HandPunch devices:    The top-mount PROX reader is available only for the HP-3000 reader.  The PROX reader on a HandPunch 3000 is able to read standard 26-bit ...
All read ranges are affected by the environment the reader and card are subjected too.  The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...
All read ranges are affected by the environment the reader and card are subjected too.  The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...
Look to see if the  "Fail Safe?UNLOCK" on communication failure is set and you have lost communication.
The "Unlock on READ" from diagnostics will clear with the next AD400 heartbeat, automatically. It will also clear with successful communication to a working access control panel. 
 If the AD-400/AD-401 is LINKED to a PIM400-TD2 and all credentials including invalid cards are granted access, the PIM400-TD2 is not communicating with the Access Control Panel, and the lock is st...
Or force a strike input to the PIM400-TD2. Short J8-1 and J8-2 (Door 1), Short J7-1 and J7-2 (Door 2) on the PIM400-TD2