How do I program my device?
The programming processes for Allegion devices can be both
product and features specific.
Some products programming processes are electronic in nature, others are
physical in nature.
...
Automatic Operators | Biometrics | Credentials | Door Controls | Doors and Frames | Electronic Locks | Exit Devices | Key Systems | Mechanical Accessories | Mechanical Locks | Power Supplies | Readers | Security Management | Software | System Components | Falcon | Glynn-Johnson | Ives | LCN | Schlage | Schlage Electronics | Steelcraft | Von Duprin
Warranty information on Allegion Commercial products.
For Warranty information, visit us.allegion.com/warranty or contact Customer Service at 877-671-7011.
...
Automatic Operators | Biometrics | Credentials | Door Controls | Electronic Locks | Exit Devices | Key Systems | Mechanical Accessories | Mechanical Locks | Power Supplies | Readers | Security Management | Software | System Components | Falcon | Glynn-Johnson | Ives | LCN | Schlage | Schlage Electronics | Steelcraft | Von Duprin | | Dexter | Zero | Sealing Systems | Readers » IP Based
What power supply is needed for EL devices?
The Von Duprin PS914 power supply must be used on the EL devices with either the 900-2RS or 900-4RL option board since the EL devices requires power supplies set at 24VDC to be able to provide the 16...
Power Supplies » Standard » PS900 Series » Von Duprin
What power supply do I need for my 2 QELA devices with LCN auto operator?
Use the PS902-2RS power supply with LCN auto operator on single door, PS904-2RS power supply on double door and PS904/906-2RS-2RS for 2 pair of QELA is required for basic operation with actu...
Automatic Operators » Electrohydraulic » 4630 Series » LCN | Automatic Operators » Electromechanical » 8200 Series » Falcon | Automatic Operators » Electromechanical » Benchmark » LCN | Automatic Operators » Electromechanical » Senior Swing » LCN | Door Controls » Automatic Operator » 7900 Series » LCN | Door Controls » Automatic Operator » 7980 Series » LCN | Power Supplies » Standard » PS900 Series » Von Duprin
How is the QEL calibrated?
The QELA motor that has shipped since 2015 is self calibrating.
Older versions had a calibration button, and these notes would apply:
Calibration is an internal process of the QEL device&nbs...
Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Power Supplies » Standard » PS900 Series » Von Duprin | System Components » Electrified System Component Accessories » Rectifier » Von Duprin | Von Duprin